|
|
Post by deepsplinter on Feb 13, 2010 5:46:24 GMT -6
that has never ventured into the world of cope and stick joinery (rail & stile), but would like to.  (more to come) |
|
|
|
Post by fredbelknap on Feb 13, 2010 7:38:35 GMT -6
Dave just dive in. I made new doors for all my kitchen cabinets and if I can do it anyone can. What have you got in mind to do?
|
|
|
|
Post by sachbvn on Feb 13, 2010 8:18:28 GMT -6
I've used pocket screws to make some raised panel doors - that is my extent. I'm game for anything!
Zac
|
|
|
|
Post by deepsplinter on Feb 13, 2010 9:12:12 GMT -6
After thinking on this a little more, maybe I'm going about it wrong, and maybe even have in the wrong place.
Here's the deal. I have a very used set of Freud rail & stile bits. They've been sharpened once. When these sets are sharpened, one of the radiuses (sp) gets bigger and the other gets smaller. No big deal (usually) until they get dull again. If they get sharpened again the radiuii (plural) get even worse, probably not acceptable. I've dressed 'em up with a diamond hone a couple times...and they're OK. I'm in the middle of a project that gets 30+ doors and end panels, so I went out and bought a new set.
I'll let 'em go for $10 + shipping or trade something. BUT...I don't want someone to get them just for a couple bearings and a slot cutter. I want some one to build a panel or two with 'em...maybe learn sumpthin along the way.
Again, these are not shot. There is (are) still quite a few doors left in 'em.
Watcha think Zac? No cyber-buddy of mine needs to be pocket-holeing doors together.
|
|
|
|
Post by Leo Voisine on Feb 13, 2010 9:42:33 GMT -6
Dave,
I think Zac - or another forum member should get first bid on the set - but if nobody bites I will.
I will give them to a friend of mine that simply cannot afford a set - and he would be thrilled to death to get them.
|
|
|
|
Post by maxwellsmart007 on Feb 14, 2010 10:09:31 GMT -6
I'm in the process of making a router table, so I'll be looking for a set someday soon so I can try making kitchen cabinets...
But I don't want to jump the line, or take them for free.
I'll buy them from you, though, Dave...but Zac or Leo chimed in first, so they get first crack at them if either wants them...
|
|
Joe Lyddon
WoW Member
Banned.
Sam Maloof & I Dec. 2, 2005
Posts: 2,507
|
Post by Joe Lyddon on Feb 14, 2010 14:20:03 GMT -6
|
|
|
|
Post by deepsplinter on Feb 15, 2010 4:17:44 GMT -6
OK fellers, gotcha on the list. Wait til I hear from Zac, and we'll go from there.
|
|
|
|
Post by sachbvn on Feb 15, 2010 13:28:43 GMT -6
Sorry guys - I've been real busy and kinda forgot about this thread..... I try to keep up when I am away from home using the internet on my phone - but it's tough to reply to anything, and I missed this post.
DS - I emailed ya.
Zac
|
|
|
|
Post by Ruffnek on Feb 15, 2010 18:07:28 GMT -6
Dave, that's a really nice thing to do.
Aren't the people on this forum great!
|
|
|
|
Post by deepsplinter on Feb 15, 2010 19:15:46 GMT -6
Thanks, Cody. But it really isn't that big of a deal. It's the "one man's junk" kinda thing. Not that they're junk, but you know what I mean.
Sorry Leo and Max, but Zac spoke first.
Hopefully, I'll be making the same offer again in a couple years.
|
|
|
|
Post by Leo Voisine on Feb 16, 2010 8:05:23 GMT -6
No need to be sorry -- I am HAPPY that Zac got it.
|
|
|
|
Post by sachbvn on Feb 16, 2010 14:48:26 GMT -6
I promise I'll post pictures of the bits in use!  Zac |
|
