|
|
Post by downyonder on May 2, 2010 15:19:17 GMT -6
i just aquired a freud router ft-2000 e in a box all turn apart and i need the wiring diagram for it. i was told it works but, until i figure out the wiring and get it put back together im not going to know if it works or just spare parts stuck in a corner some place.
can anyone help me with the wiring?
and yes i have already contacted freud and i haven't gotten any response from them yet.
|
|
|
|
Post by TDHofstetter on May 2, 2010 15:39:45 GMT -6
If it comes down to it, I'll yank mine open for ya & make up a photo-pictorial of where the wiring goes. Once we get it running, you'll LIKE that router.
|
|
|
|
Post by downyonder on May 2, 2010 16:48:58 GMT -6
that would be totally up to you if ya do it. i know if i was the one that took this one apart id been able to put it back together i even took my router apart to see if it would help but, it is totally different.
|
|
|
|
Post by sachbvn on May 2, 2010 17:02:27 GMT -6
If it comes down to it, I'll yank mine open for ya & make up a photo-pictorial of where the wiring goes. Once we get it running, you'll LIKE that router. .....because that's the kinda guy Tim is. I know you already know this - but you (downyonder as well as the rest of us) are lucky to be a part of this forum. GREAT, GREAT guys on here!! Zac |
|
|
|
Post by Ruffnek on May 2, 2010 17:35:46 GMT -6
If it comes down to it, I'll yank mine open for ya & make up a photo-pictorial of where the wiring goes. Once we get it running, you'll LIKE that router. .....because that's the kinda guy Tim is. I know you already know this - but you (downyonder as well as the rest of us) are lucky to be a part of this forum. GREAT, GREAT guys on here!! Zac Ain't that the truth. I don't know that I would be willing to tear down one of my routers for a look at the wiring. That's a very generous offer, Tim. |
|
|
|
Post by TDHofstetter on May 2, 2010 18:16:25 GMT -6
I b'lieve this is what you're looking for:   |
|
|
|
Post by sachbvn on May 2, 2010 18:21:03 GMT -6
Tim....but what's on the INSIDE???/  nah, I'm totally teasin! Zac |
|
|
|
Post by TDHofstetter on May 2, 2010 18:31:14 GMT -6
"Guts".  |
|
Beamer
Forum Management 
Posts: 1,176
|
Post by Beamer on May 2, 2010 18:33:36 GMT -6
"The Magic Smoke" of course! |
|
|
|
Post by downyonder on May 2, 2010 18:46:40 GMT -6
that should do it thanks alot. now to find out if it still works
|
|
|
|
Post by downyonder on May 2, 2010 18:52:09 GMT -6
 mine has the varible speed control and there is a that comes from it ? where does it go on the motor that brown wire goes down on the motor but, where? |
|
|
|
Post by TDHofstetter on May 2, 2010 19:33:27 GMT -6
That'll go right here:   |
|
|
|
Post by downyonder on May 2, 2010 20:07:21 GMT -6
ok with that and the area that it is compared to the brush i think i got it . if it burns up ill blame myself. but, that should do it thank you for your help.
|
|
|
|
Post by TDHofstetter on May 2, 2010 20:12:31 GMT -6
I'm curious... did you ever get a good explanation as to why it was all apart?
|
|
|
|
Post by downyonder on May 2, 2010 20:19:12 GMT -6
yes, to replace the brushes and he didnt know howit went back togther(most likely the wires) but, for what i gave for it i wont complain even if it doesnt work.
|
|
|
|
Post by TDHofstetter on May 2, 2010 21:00:59 GMT -6
|
|
|
|
Post by downyonder on May 2, 2010 21:01:05 GMT -6
 thanks tim and yes it works.
|
|
|
|
Post by TDHofstetter on May 2, 2010 21:03:29 GMT -6
EXCELLENT!
Now... how much you into it for? I'm not sure I even wanna' know, 'cause it'll be a LOT LESS than I paid for mine... but how much?
|
|
|
|
Post by downyonder on May 2, 2010 21:04:33 GMT -6
2dollars
|
|
|
|
Post by TDHofstetter on May 2, 2010 21:39:31 GMT -6
! ! !
SWALLOWING HARD...
Holy CRAP!
You can go to PRISON for THAT kinda' deal!
|
|
nah, I'm totally teasin!
